Thursday, February 27, 2014

New CT tag and PTU tutorial for Designs by Norella



New CT tag and PTU tutorial for Designs by Norella
Artist: Poser Tube "Penelope" by Designs by Norella @ PFD
Scrapkit: Steampunk Rocker Matching kit for "Penelope" by Michelles' Myths @ PFD

Font: Steamwreck
FILTERS USED: Gradient Glow, Drop Shadow, Gaussian Blur, Luminace Legacy, and Hard Light.
This tutorial was written by me, Feb. 27, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 
Open a new canvas 650x650
 Copy and paste Frame 6, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste Paper 5, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her. Duplicate your close up tube once and on the top tube layer add Gausian Blur and change the blend mode to Hard Light.  On the bottom tube layer change the blend mode to Luminance Legacy.  Dropshadow your frame and bottom close up tube.  Make sure your tube and paper are under the frame.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

SR-MM 3
SR-MM 6
SR-MM 9
SR-MM 12
SR-MM 33
SR-MM 37
SR-MM 40
SR-MM 44
SR-MM 50
SR-MM 55
SR-MM 56



Add your copyrights and your name.
I used Steamwreck for the name.
Merge all visible and save as PNG.
And your done.  Hope you enjoyed using my tutorial.

xoxo
Angie

Wednesday, February 26, 2014

CT tag and tut for Ishika Chowdhury



CT tag and tut for Ishika Chowdhury
Artist: Ishika Chowdhury @ Mystical Scraps
Scrapkit: FTU kit called The Goodies by Tasha's Playground

PSP - I use 9 but any version should work.
Mask: No mask
Supplies:
Artist: Ishika Chowdhury @ Mystical Scraps
Scrapkit: FTU kit called The Goodies by Tasha's Playground

Font: Fiolex Girls
FILTERS USED: Gradient Glow, Drop Shadow.
This tutorial was written by me, Feb. 26, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 
Open a new canvas 650x650
 Copy and paste Frame, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste p8 Paper, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her. Dropshadow your frame and tube.  Make sure your tube and paper are under the frame.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

Bottles
branch 2
cloud
dragonflies
flower branch
flower3
frog
grass
grass2
petals
rose
tree2
word art



Add your copyrights and your name.
I used Fiolex Girls for the name.
Merge all visible and save as PNG.
And your done.  Hope you enjoyed using my tutorial.

xoxo
Angie

Tuesday, February 25, 2014

New CT tag and PTU tutorial for Artistically Inclined Licensing


               New CT tag and PTU tutorial for Artistically Inclined Licensing
Artist: Wendy Gerber @ AIL
Here
Scrapkit: Coyote Designs Scraps @ AIL
Here

PSP - I use 9 but any version should work.
Mask: No mask
Supplies:
Artist: Wendy Gerber @ AIL
Scrapkit: Coyote Designs Scraps @ AIL

Font: KG Luck of the Irish
FILTERS USED: Gradient Glow, Drop Shadow.
This tutorial was written by me, Feb. 25, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 
Open a new canvas 650x650
 Copy and paste Frame2, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste Paper  pp6, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her. Dropshadow your frame and tube.  Make sure your tube and paper are under the frame.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

ele1
ele3
ele6
ele7
ele10
ele13
ele15
ele16
ele23
ele27
ele28
ele29


Add your copyrights and your name.
I used KG Luck of the Irish for the name.
Merge all visible and save as PNG.
And your done.  Hope you enjoyed using my tutorial.

xoxo
Angie

Wednesday, February 19, 2014

New CT Tag and PTU Tutorial for Medusa Creation's called "Secret Garden"



New CT tag and PTU tutorial for Medusa's Creations
Artist: Alex Prihodko @ PFD I used two different tubes
Scrapkit: Secret Garden by Kez @ Medusa Creation's @ PFD

PSP - I use 9 but any version should work.
Mask: No mask
Supplies:
Artist: Alex Prihodko @ PFD I used two different tubes
Scrapkit: Secret Garden by Kez @ Medusa Creation's @ PFD

Font: KR Floral Script
FILTERS USED: Gradient Glow, Drop Shadow.
This tutorial was written by me, Feb. 19, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 
Open a new canvas 650x650
 Copy and paste F2 Frame, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste P4 Paper, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her. Dropshadow your frame and tube.  Make sure your tube and paper are under the frame.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

E1
E2
E3
E4
E5
E12
E13
E18
E19
E20
E22
E24
E27
E28
E34
E36
E39
E51
E52
E56
E57
E70



Add your copyrights and your name.
I used KR Floral Script for the name.
Merge all visible and save as PNG.
And your done.  Hope you enjoyed using my tutorial.

xoxo
Angie

Sunday, February 16, 2014

New CT tag and PTU tutorial for Medusa's Creations



New CT tag and PTU tutorial for Medusa's Creations
Artist: Lorri Kajenna @ Pics for Design
Scrapkit: Kez @ Medusa's Creations

PSP - I use 9 but any version should work.
Mask: No mask
Supplies:
Artist: Lorri Kajenna @ Pics for Design
Scrapkit by Kez @ Medusa's Creations

Font: Lydia Puente)
FILTERS USED: Gradient Glow, Drop Shadow, Gaussian Blur, Hard Light
This tutorial was written by me, Feb. 17, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 
Open a new canvas 650x650
 Copy and paste Frame 3, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste Paper 11, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her.  Duplicate  tube once.  On the top layer of the tube apply Gaussian Blur 10.  Change blend mode to Hard Light.    Dropshadow your frame and tube.  Make sure your tubes and paper are under the frame.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

E1
E2
E3
E6
E7
E8
E12
E13
E14
E15
E16
E17
E18
E19
E27
E25



Add your copyrights and your name.
I used Lydia Puente) for the name.
Merge all visible and save as PNG.
And your done.  Hope you enjoyed using my tutorial.

xoxo
Angie

New CT tag and PTU tutorial for Dance in the Rain called "Fairyland"



New CT tag and PTU tutorial for Dance in the Rain called "Fairyland"
Artist: Spazzd Art Here
Scrapkit: Fairyland by Dance in the Rain


PSP - I use 9 but any version should work.
Mask: No mask
Supplies:
Artist: Spazzd Art Here
Scrapkit by Fairyland by Dance in the Rain

Font: Fiolex Girls
FILTERS USED: Gradient Glow, Drop Shadow, Gaussian Blur, Hard Light, and Luminance Legacy
This tutorial was written by me, Feb. 16, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 
Open a new canvas 650x650
 Copy and paste Frame 3, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste Paper 4, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her.  Duplicate  tube once.  On the top layer of the tube apply Gaussian Blur 10.  Change blend mode to Hard Light. On the bottom tube layer change blend mode to Luminace Legacy.    Dropshadow your frame and tube.  Make sure your tubes and paper are under the frame.

Copy and paste your main tube of a male and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

Element 9
Element 16
Element 18
Element 22
Element 30
Element 35
Element 37
Element 54
Element 57
Element 69
Element 72



Add your copyrights and your name.
I used Fiolex Girls for the name.
Merge all visible and save as PNG.
And your done.  Hope you enjoyed using my tutorial.

xoxo
Angie

New CT Tag and PTU Tutorial for Black Widow Creationz "Moonlight"



New CT Tag and PTU Tutorial for Black Widow Creationz "Moonlight"
Artist: Alehandra_Vanhek @ Pics for Design
Scrapkit: Bright as Moonlight by Black Widow Creationz

PSP - I use 9 but any version should work.
Mask: No mask
Supplies:
Artist: Alehandra_Vanhek @ Pics for Design
Scrapkit by Bright as Moonlight by Black Widow Creationz

Font: Mon Amour Script Pro
FILTERS USED: Gradient Glow, Drop Shadow, Gaussian Blur, Hard Light, and Luminance Legacy
This tutorial was written by me, Feb. 16, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 
Open a new canvas 650x650
 Copy and paste EL15 Frame, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste PP8 Paper, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her.  Duplicate  tube once.  On the top layer of the tube apply Gaussian Blur 10.  Change blend mode to Hard Light. On the bottom tube layer change blend mode to Luminace Legacy.    Dropshadow your frame and tube.  Make sure your tubes and paper are under the frame.

Copy and paste your main tube of a male and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

EL1
EL2
EL4
EL5
EL8
EL10
EL12
EL15
EL18
EL20
EL22
EL23
EL24
EL26
EL29
EL34
EL37
EL40
EL44



Add your copyrights and your name.
I used Mon Amour Script Pro for the name.
Merge all visible and save as PNG.
And your done.  Hope you enjoyed using my tutorial.

xoxo
Angie

New CT tag and PTU Tutorial for Bibi's Collection called "Mummy Maat"



New CT tag and PTU tutorial for Bibi's Collection
Artist: Di_Halim @ Scraps N Company
Scrapkit: Bibi's Collection Mummy Maat that matches the tube.

PSP - I use 9 but any version should work.
Mask: No mask
Supplies:
Artist: Di_Halim @ Scraps N Company
Scrapkit by Bibi's Collection Mummy Maat that matches the tube.

Font: Pegypta
FILTERS USED: Gradient Glow, Drop Shadow, Gaussian Blur, Hard Light.
This tutorial was written by me, Feb. 16, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 
Open a new canvas 650x650
 Copy and paste Elem 100 Frame, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste Paper 8, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube, resize as needed and place where you want her.  Duplicate  tube once.  On the top layer of the tube apply Gaussian Blur 10.  Change blend mode to Hard Light.    Dropshadow your frame and tube.

Copy and paste your main tube and resize as needed and place where desired.  Copy and paste  Elem 67 the Archway, resize and dropshadow and place behind the main tube.  Select your freehand tool and trace the Archway.  Copy and paste Paper 3 and resize and place how you want it in the archway and then invert and delete on your keyboard.  Move this layer below the archway layer so that it looks like the sky outside the doorway.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

Elem 3
Elem 4
Elem 5
Elem 12
Elem 23
Elem 29
Elem 31
Elem 36
Elem 40
Elem 44
Elem 47
Elem 73
Elem 76
Elem 81
Elem 86
Elem 97
Elem 108
Elem 127
Elem 147



Add your copyrights and your name.
I used Pegypta for the name.
Merge all visible and save as PNG.
And your done.  Hope you enjoyed using my tutorial.

xoxo
Angie