New CT tag and PTU tutorial for Designs by Norella

New CT tag and PTU tutorial for Designs by Norella

Artist: Poser Tube "Penelope" by Designs by Norella @ PFD

Pics for Design

Scrapkit: Steampunk Rocker Matching kit for "Penelope" by Michelles' Myths @ PFD

Pics for Design

Font: Steamwreck

FILTERS USED: Gradient Glow, Drop Shadow, Gaussian Blur, Luminace Legacy, and Hard Light.

This tutorial was written by me, Feb. 27, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste Frame 6, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste Paper 5, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her. Duplicate your close up tube once and on the top tube layer add Gausian Blur and change the blend mode to Hard Light.  On the bottom tube layer change the blend mode to Luminance Legacy.  Dropshadow your frame and bottom close up tube.  Make sure your tube and paper are under the frame.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

SR-MM 3

SR-MM 6

SR-MM 9

SR-MM 12

SR-MM 33

SR-MM 37

SR-MM 40

SR-MM 44

SR-MM 50

SR-MM 55

SR-MM 56

Add your copyrights and your name.

I used Steamwreck for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

CT tag and tut for Ishika Chowdhury

CT tag and tut for Ishika Chowdhury

Artist: Ishika Chowdhury @ Mystical Scraps

Here

Scrapkit: FTU kit called The Goodies by Tasha's Playground

Here

PSP - I use 9 but any version should work.

Mask: No mask

Supplies:

Artist: Ishika Chowdhury @ Mystical Scraps

Here

Scrapkit: FTU kit called The Goodies by Tasha's Playground

Here

Font: Fiolex Girls

FILTERS USED: Gradient Glow, Drop Shadow.

This tutorial was written by me, Feb. 26, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste Frame, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste p8 Paper, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her. Dropshadow your frame and tube.  Make sure your tube and paper are under the frame.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

Bottles
branch 2

cloud

dragonflies

flower branch

flower3

frog

grass

grass2

petals

rose

tree2

word art

Add your copyrights and your name.

I used Fiolex Girls for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

New CT tag and PTU tutorial for Artistically Inclined Licensing

               New CT tag and PTU tutorial for Artistically Inclined Licensing
Artist: Wendy Gerber @ AIL
Here
Scrapkit: Coyote Designs Scraps @ AIL
Here

PSP - I use 9 but any version should work.

Mask: No mask

Supplies:

Artist: Wendy Gerber @ AIL

Here

Scrapkit: Coyote Designs Scraps @ AIL

Here

Font: KG Luck of the Irish

FILTERS USED: Gradient Glow, Drop Shadow.

This tutorial was written by me, Feb. 25, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste Frame2, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste Paper  pp6, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her. Dropshadow your frame and tube.  Make sure your tube and paper are under the frame.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

ele1

ele3

ele6

ele7

ele10

ele13

ele15

ele16

ele23

ele27

ele28

ele29

Add your copyrights and your name.

I used KG Luck of the Irish for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

New CT Tag and PTU Tutorial for Medusa Creation's called "Secret Garden"

New CT tag and PTU tutorial for Medusa's Creations

Artist: Alex Prihodko @ PFD I used two different tubes

Pics for Design

Scrapkit: Secret Garden by Kez @ Medusa Creation's @ PFD

Pics for Design

PSP - I use 9 but any version should work.

Mask: No mask

Supplies:

Artist: Alex Prihodko @ PFD I used two different tubes

Pics for Design

Scrapkit: Secret Garden by Kez @ Medusa Creation's @ PFD

Pics for Design

Font: KR Floral Script

FILTERS USED: Gradient Glow, Drop Shadow.

This tutorial was written by me, Feb. 19, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste F2 Frame, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste P4 Paper, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her. Dropshadow your frame and tube.  Make sure your tube and paper are under the frame.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

E1

E2

E3

E4

E5

E12

E13

E18

E19

E20

E22

E24

E27

E28

E34

E36

E39

E51

E52

E56

E57

E70

Add your copyrights and your name.

I used KR Floral Script for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

New CT tag and PTU tutorial for Medusa's Creations

New CT tag and PTU tutorial for Medusa's Creations

Artist: Lorri Kajenna @ Pics for Design

Here

Scrapkit: Kez @ Medusa's Creations

Pics for Design

PSP - I use 9 but any version should work.

Mask: No mask

Supplies:

Artist: Lorri Kajenna @ Pics for Design

Here

Scrapkit by Kez @ Medusa's Creations

Pics for Design

Font: Lydia Puente)

FILTERS USED: Gradient Glow, Drop Shadow, Gaussian Blur, Hard Light

This tutorial was written by me, Feb. 17, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste Frame 3, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste Paper 11, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her.  Duplicate  tube once.  On the top layer of the tube apply Gaussian Blur 10.  Change blend mode to Hard Light.    Dropshadow your frame and tube.  Make sure your tubes and paper are under the frame.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

E1

E2

E3

E6

E7

E8

E12

E13

E14

E15

E16

E17

E18

E19

E27

E25

Add your copyrights and your name.

I used Lydia Puente) for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

New CT tag and PTU tutorial for Dance in the Rain called "Fairyland"

New CT tag and PTU tutorial for Dance in the Rain called "Fairyland"

Artist: Spazzd Art Here

Scrapkit: Fairyland by Dance in the Rain

Scraps N Company

PSP - I use 9 but any version should work.

Mask: No mask

Supplies:

Artist: Spazzd Art Here

Scrapkit by Fairyland by Dance in the Rain

Scraps N Company

Font: Fiolex Girls

FILTERS USED: Gradient Glow, Drop Shadow, Gaussian Blur, Hard Light, and Luminance Legacy

This tutorial was written by me, Feb. 16, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste Frame 3, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste Paper 4, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her.  Duplicate  tube once.  On the top layer of the tube apply Gaussian Blur 10.  Change blend mode to Hard Light. On the bottom tube layer change blend mode to Luminace Legacy.    Dropshadow your frame and tube.  Make sure your tubes and paper are under the frame.

Copy and paste your main tube of a male and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

Element 9

Element 16

Element 18

Element 22

Element 30

Element 35

Element 37

Element 54

Element 57

Element 69

Element 72

Add your copyrights and your name.

I used Fiolex Girls for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

New CT Tag and PTU Tutorial for Black Widow Creationz "Moonlight"

New CT Tag and PTU Tutorial for Black Widow Creationz "Moonlight"

Artist: Alehandra_Vanhek @ Pics for Design

Here

Scrapkit: Bright as Moonlight by Black Widow Creationz

Here

PSP - I use 9 but any version should work.

Mask: No mask

Supplies:

Artist: Alehandra_Vanhek @ Pics for Design

Here

Scrapkit by Bright as Moonlight by Black Widow Creationz

Here

Font: Mon Amour Script Pro

FILTERS USED: Gradient Glow, Drop Shadow, Gaussian Blur, Hard Light, and Luminance Legacy

This tutorial was written by me, Feb. 16, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste EL15 Frame, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste PP8 Paper, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube of choice, resize as needed and place where you want her.  Duplicate  tube once.  On the top layer of the tube apply Gaussian Blur 10.  Change blend mode to Hard Light. On the bottom tube layer change blend mode to Luminace Legacy.    Dropshadow your frame and tube.  Make sure your tubes and paper are under the frame.

Copy and paste your main tube of a male and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

EL1

EL2

EL4

EL5

EL8

EL10

EL12

EL15

EL18

EL20

EL22

EL23

EL24

EL26

EL29

EL34

EL37

EL40

EL44

Add your copyrights and your name.

I used Mon Amour Script Pro for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

New CT tag and PTU Tutorial for Bibi's Collection called "Mummy Maat"

New CT tag and PTU tutorial for Bibi's Collection

Artist: Di_Halim @ Scraps N Company

Here

Scrapkit: Bibi's Collection Mummy Maat that matches the tube.

Here

PSP - I use 9 but any version should work.

Mask: No mask

Supplies:

Artist: Di_Halim @ Scraps N Company

Here

Scrapkit by Bibi's Collection Mummy Maat that matches the tube.

Here

Font: Pegypta

FILTERS USED: Gradient Glow, Drop Shadow, Gaussian Blur, Hard Light.

This tutorial was written by me, Feb. 16, 2014.  Any resemblance to any other tutorial is purely coincidental.  Please do not claim it as your own.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste Elem 100 Frame, and resize as needed.  Click inside with the magic wand and Modify, Expand by 5.  Copy and paste Paper 8, resize as needed and then invert and hit delete on keyboard.  Make sure the paper is under your frame.  While still selected, copy and paste your close up tube, resize as needed and place where you want her.  Duplicate  tube once.  On the top layer of the tube apply Gaussian Blur 10.  Change blend mode to Hard Light.    Dropshadow your frame and tube.

Copy and paste your main tube and resize as needed and place where desired.  Copy and paste  Elem 67 the Archway, resize and dropshadow and place behind the main tube.  Select your freehand tool and trace the Archway.  Copy and paste Paper 3 and resize and place how you want it in the archway and then invert and delete on your keyboard.  Move this layer below the archway layer so that it looks like the sky outside the doorway.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and main tube.  Here are the elements I used:

Elem 3

Elem 4

Elem 5

Elem 12

Elem 23

Elem 29

Elem 31

Elem 36

Elem 40

Elem 44

Elem 47

Elem 73

Elem 76

Elem 81

Elem 86

Elem 97

Elem 108

Elem 127

Elem 147

Add your copyrights and your name.

I used Pegypta for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie