"Our Love will Never Die" CT tag and PTU tutorial for Felice Original

 

"Our Love will Never Die" CT tag and PTU tutorial for Felice Original
Artist: "In Love" tubes by Arthur Crowe @ Arthur Crowe's Factory
Purchase tube here

You must have a license to use his art.

I used a bonus set that is not available anymore.  But you can use any tubes you would like for this tut.  Mine is only for reference.
Scrap Kit: "Our Love Will Never Die" by Felice Original @ Exquistite Scraps
Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  "In Love" tubes by Arthur Crowe @ Arthur Crowe's Factory
Purchase tube here

Scrapkit:  "Our Love Will Never Die" by Felice Original @ Exquistite Scraps
Purchase kit here

Font: Vampiress

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/30/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

FOStripeBlack&Red Paper and apply your mask of choice.  Merge group.  Then copy and paste element black57.  Click on it with your magic wand and then selections modify contract by 10.  Copy and paste FOVintageDamaskRed Paper and then resize it to 50%.  Invert and delete on your keyboard.  Copy and paste the female close up tube and resize as needed.  Place her where you want and then invert and delete.  Selections None.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

 

BadStone
BlackRose2
Boots
BowBlack&Red
Bracelet
CoresetBlack
Crow
CrowFlying
Goblet
HeartCharmPin
Necklace
Reaper
Ring
SpikeCollar
Sword
WingedHeartFrame

 

 Merge visible and add your copyrights and your name.

I used Vampiress for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

 

"Springtime in Wonderland" CT tag and PTU tutorial for Michelle's Myths

 

"Springtime in Wonderland" CT tag and PTU tutorial for Michelle's Myths

Artist: Alice by VeryMany @ VeryMany Tubes

Purchase tube here

You must have a license to use their art.

Scrap Kit: Springtime in Wonderland by Michelle's Myths @ Pics for Design

Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Alice by VeryMany @ VeryMany Tubes

Purchase tube here

Scrapkit:  Springtime in Wonderland by Michelle's Myths @ Pics for Design

Purchase kit here

Font: Alice in Wonderland

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/30/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

Paper 2 and apply your mask of choice.  Merge group.  

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

 

1

5

9

10

15

23

44

45

46

49

50

52

62

80

84

85

96

100

101

103

104

105

108

111

127

128

131

136

 

 

 Merge visible and add your copyrights and your name.

I used Alice in Wonderland for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

"Black Pearl" CT tag and PTU tutorial for PO-Concept

 

"Black Pearl" CT tag and PTU tutorial for PO-Concept
Artist: Pirate by Di_Halim @ Scraps N Company
Purchase tube here

You must have a license to use her art.
Scrap Kit: Black Pearl Sloop by PO-Concept @ Scraps N Company
Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Pirate by Di_Halim @ Scraps N Company
Purchase tube here

Scrapkit:  Black Pearl Sloop by PO-Concept @ Scraps N Company
Purchase kit here

Font: Pieces of Eight

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/26/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

pp1 and apply your mask of choice.  Merge group.  Then copy and paste element black57.  Click on it with your magic wand and then selections modify contract by 10.  Copy and paste pp6 and then resize it to 50%.  Move it to where it looks like you can see the waves in the porthole.  Invert and delete on your keyboard.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

 

black12
black13
black14
black17
black23
black24
black30
black37
black51
black53
black55
black60
black69
black74
black78
black80
black86
black90
black92
black93
black94
black99
black102
black120
black121
black122
black123
black126
black128
black129
black137
black146
black156

 

 

Some of these elements I put into the porthole so that there is a little scene in there.  Looks like she is looking out of the porthole.

 

 Merge visible and add your copyrights and your name.

I used Pieces of Eight for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

 

"Hoot Hoot" CT tag and PTU tutorial for PO-Concept

 

"Hoot Hoot" CT tag and PTU tutorial for PO-Concept
Artist: Lady with Owls by Alfadesire @ Pics for Design
Purchase tube here

You must have a license to use this art.
Scrap Kit: Hoot Hoot by PO-Concept @ Pics for Design
Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Tony Tzanoukakis @ Tony TZ Store
Purchase tube here

Scrapkit:  Odelina Faery Series by Kittie's Sinful Designz @ Mystical Scraps
Purchase kit here

Font: Beyond Wonderland

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/26/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

hopp7 Paper and apply your mask of choice.  Merge group.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

 

ho4
ho6
ho6
ho28
ho55
ho56
ho57
ho64
ho70
ho72
ho85
ho86
ho89
ho90
ho95
ho100

 

 

I also added the two owls that came with the tube.

 

 Merge visible and add your copyrights and your name.

I used Beyond Wonderland for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

"Odelina" CT tag and PTU tutorial for Mystical Scraps

 

"Odelina" CT tag and PTU tutorial for Mystical Scraps
Artist: Tony Tzanoukakis @ Tony TZ Store
Purchase tube here

You must have a license to use his art.
Scrap Kit: Odelina Faery Series by Kittie's Sinful Designz @ Mystical Scraps
Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Tony Tzanoukakis @ Tony TZ Store
Purchase tube here

Scrapkit:  Odelina Faery Series by Kittie's Sinful Designz @ Mystical Scraps
Purchase kit here

Font: Summertime

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/26/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

Paper 18 and apply your mask of choice.  Merge group.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

 

Butterfly 1
Cloud
Flower Stem
Jug
Ladder
Oak Tree
Odelina 1
Odelina 2
Odelina 3
PixieDust Trail
Ribboned Flower
Rose Bud
Sparkles
Sun
Turn
Wooden Wagon

 

 

I also added the Close up tube above the mask layer and lowered the opacity to 50 to give her a ghostly look.

 

 Merge visible and add your copyrights and your name.

I used Summertime for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

"Spring Time" CT tag and PTU tutorial for Dance in the Rain

 

"Spring Time"  CT tag and PTU tutorial for Dance in the Rain
Artist: Forest Fairy by Arthur Crowe @ Arthur Crowe Factory
Purchase tube here

You must have a license to use his art.
Scrap Kit: Spring Time by Dance in the Rain @ Pics for Design
Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Forest Fairy by Arthur Crowe @ Arthur Crowe Factory
Purchase tube here

Scrapkit:  Spring Time by Dance in the Rain @ Pics for Design
Purchase kit here

Font: Wizard Of The Moon

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/26/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

Paper 1 and apply your mask of choice.  Merge group.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

 

Element 2
Element 4
Element 9
Element 15
Element 16
Element 18
Element 28
Element 29
Element 33
Element 34
Element 35
Element 36
Element 38
Element 40
Element 41
Element 42
Element 44
Element 48
Element 49
Element 50
Element 52
Element 79
Element 82
Element 97
Element 99
Element 101
Element 103
Element 104

 

 

I also added the Close up tube above the mask layer and lowered the opacity to 50 to give her a ghostly look.

 

 Merge visible and add your copyrights and your name.

I used Wizard Of The Moon for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

 

"Enchanted Garden" CT tag and PTU tutorial for Creative Crazy Scraps

 

"Enchanted Garden" CT tag and PTU tutorial for Creative Crazy Scraps
Artist: Flora Fairy by Arthur Crowe @ Arthur Crowe Factory
Purchase tube here

You must have a license to use his art.
Scrap Kit: Enchanted Garden by Stu Kidd @ Creative Crazy Scraps
Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Flora Fairy by Arthur Crowe @ Arthur Crowe Factory
Purchase tube here

Scrapkit:  Enchanted Garden by Stu Kidd @ Creative Crazy Scraps
Purchase kit here

Font: Jellyka - Love and Passion

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/26/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

Paper 3 and apply your mask of choice.  Merge group.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

 

E1
E3
E5
E6
E8
E9
E10
E13
E17
E20
E21
E22
E24
E25
E27
E29
E30
E35
E36
E38
E40

 

 

I also added the Close up tube above the mask layer and lowered the opacity to 50 to give her a ghostly look.

 

 Merge visible and add your copyrights and your name.

I used Jellyka - Love and Passion for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

 

"Steampunk Jane" CT tag and PTU tutorial for Black Widow Creationz

 

"Steampunk Jane" CT tag and PTU tutorial for Black Widow Creationz

Artist: Arthur Crowe @ Arthur Crowe Factory
Purchase tube here

You must have a license to use his art.
Scrap Kit: "Jane's Steampunk" by Black Widow Creationz
Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Arthur Crowe @ Arthur Crowe FactoryPurchase tube here

Scrapkit: "Jane's Steampunk" by Black Widow Creationz
Purchase kit here

 

 

 

 

Font: Steamwreck

FILTERS USED:  Gaussian Blur,  Hard Light, Gradient Glow,  and Drop Shadow.

This tutorial was written by me on 4/26/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed
PP2 Paper and apply your mask of choice.  Over your mask Copy and paste EL23 Frame and resize as needed.  Click inside the frame with your magic wand.  Modify, expand by 5.  Now copy and paste PP5 Paper and then invert and delete on your keyboard.  Make sure you put your paper layer under the frame layer.  Now while still selected Copy and paste your tube of choice and resize and place where you want her.  Invert and delete on your keyboard.  Make sure your tube is under the frame but above the paper.  Dropshadow the tube and frame.

Merge your tubes together and duplicate once.  On the top duplicate Gaussian Blur 3 and then change the blend mode to Hard Light.  On the bottom duplicate change the blend mode to Luminance Legacy.

 

 

  Copy and Paste you main tube and resize as needed and place her where desired. Now add Porcelain default settings to your main tube.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and your main tube. Now copy and paste the word art and place where desired.  Dropshadow.  Here are the elements I used:

EL3
EL4
EL5
EL6
EL7
EL8
EL10
EL14
EL21
EL25
EL28
EL30
EL33
EL34
EL35
EL40
EL41

 

 

Add your copyrights and your name.

I used Steamwreck for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

"Ahoy Mate" CT tag and PTU tutorial for Bibi's Collection

 

"Ahoy Mate" CT tag and PTU tutorial for Bibi's Collection
Artist: Alehandra_Vanhek @ Pics for Design
Purchase tube here

You must have a license to use her art.
Scrap Kit: "Ahoy" by Bibi's Collection @ S&CO
Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Alehandra_Vanhek @ Pics for Design
Purchase tube here

Scrapkit:  "Ahoy" by Bibi's Collection @ S&CO
Purchase kit here

Font: Pieces of Eight

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/26/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

Paper 6 and apply your mask of choice.  Merge group.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

 

Elems 4
Elems 10
Elems 13
Elems 21
Elems 22
Elems 23
Elems 28
Elems 31
Elems 37
Elems 38
Elems 46
Elems 51
Elems 53
Elems 59
Elems 62
Elems 66
Elems 68
Elems 71
Elems 72
Elems 73

 

 

 

 Merge visible and add your copyrights and your name.

I used Pieces of Eight for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

"Violet Vixen" CT tag and PTU tutorial for Anna's Attic

 

"Violet Vixen" CT tag and PTU tutorial for Anna's Attic
Artist: Arthur Crowe @ Arthur Crowe Factory
Purchase tube here

You must have a license to use his art.
Scrap Kit: "Violet Vixen" by Anna's Attic @ PFD
Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Arthur Crowe @ Arthur Crowe FactoryPurchase tube here

Scrapkit: "Violet Vixen" by Anna's Attic @ PFD
Purchase kit here

 

 

 

 

Font: Aint Nothing Fancy

FILTERS USED:  Gaussian Blur, Luminence Legacy, Hard Light, Gradient Glow,  and Drop Shadow.

This tutorial was written by me on 4/26/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed
Paper 9 and apply your mask of choice.  Over your mask Copy and paste Frame 5 and resize as needed.  Click inside the frame with your magic wand.  Modify, expand by 5.  Now copy and paste Paper 10 and then invert and delete on your keyboard.  Make sure you put your paper layer under the frame layer.  Now while still selected Copy and paste your tube of choice and resize and place where you want her.  Invert and delete on your keyboard.  Make sure your tube is under the frame but above the paper.  Dropshadow the tube and frame.

Merge your tubes together and duplicate once.  On the top duplicate Gaussian Blur 3 and then change the blend mode to Hard Light.  On the bottom duplicate change the blend mode to Luminance Legacy.

 

 

  Copy and Paste you main tube and resize as needed and place her where desired. Now add Porcelain default settings to your main tube.  Now you can place whatever elements you would like, resize as needed and place where desired.  Dropshadow your elements and your main tube. Now copy and paste the word art and place where desired.  Dropshadow.  Here are the elements I used:

Bottle 2
Bullett
Condom
Cuffs
Firestand
Flowers
Glass
Gun
Lipstick
Pierced Lips
Star Keychain
Thunderbolt

 

 

Add your copyrights and your name.

I used Aint Nothing Fancy for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

 

"Arachno Girl" CT tag and PTU tutorial for S&CO

 

 

"Arachno Girl" CT tag and PTU tutorial for S&CO
Artist: "Spider" by Andy Cooper @ Scraps N Company
Purchase tube here

You must have a license to use his art.
Scrap Kit: "Arachnogirl" by DBJoan Scraps @ Scraps N Company.  This is a matching kit for the tube.
Purchase kit here

 

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  "Spider" by Andy Cooper @ Scraps N Company
Purchase tube here

Scrapkit:  "Arachnogirl" by DBJoan Scraps @ Scraps N Company.  This is a matching kit for the tube.
Purchase kit here

Font: Homoarakhn

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/24/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

Paper 9 and apply your mask of choice.  Merge group.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

 

DBJ 1
DBJ 2
DBJ 3
DBJ 4
DBJ 5
DBJ 6
DBJ 10
DBJ 29
DBJ 31
DBJ 32
DBJ 33
DBJ 34
DBJ 3
DBJ 39
DBJ 41
DBJ 46
DBJ 52
DBJ 53
DBJ 54
DBJ 61
DBJ 65
DBJ 70
DBJ 77
DBJ 80

 

 

I also added the Close up tube above the mask layer and lowered the opacity to 50 to give her a ghostly look.

 

 Merge visible and add your copyrights and your name.

I used Homoarakhn for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

"Red Queen" CT tag and PTU tutorial for S&CO

 

 

"Red Queen" CT tag and PTU tutorial for S&CO

Artist: "Red Queen" by Danny Lee @ S&CO

Purchase tube here

You must have a license to use his art.

Scrap Kit: "Red Queen" matching kit for the "Red Queen" Danny Lee tube @ S&CO

Purchase kit here

 

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Michael Landefeld @ Creative Design Outlet

Purchase tube here

Scrapkit:  "FantaSea" by Anna's Attic @ Pics for Design

Purchase kit here

Font: Alice in Wonderland

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/22/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

paper3 and apply your mask of choice.  Merge group.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

 

element1

element3

element4

element5

element6

element7

element9

element10

element11

element14

element15

element16

element18

element24

element26

element27

element29

element31

element32

element33

element34

element36

element37

element39

element41

element47

element49

 

 Merge visible and add your copyrights and your name.

I used Alice in Wonderland for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

 

 

"Fanta Sea" CT tag and PTU tutorial for Anna's Attic

 

"Fanta Sea" CT tag and PTU tutorial for Anna's Attic

Artist: Michael Landefeld @ Creative Design Outlet

Purchase tube here

You must have a license to use his art.

Scrap Kit: "FantaSea" by Anna's Attic @ Pics for Design

Purchase kit here

 

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Michael Landefeld @ Creative Design Outlet

Purchase tube here

Scrapkit:  "FantaSea" by Anna's Attic @ Pics for Design

Purchase kit here

Font: Ocean

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/22/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed

Paper 9 and apply your mask of choice.  Merge group.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired.   Dropshadow your elements and main tube.  Here are the elements I used:

Bubbles 3

Crab 3

Dolphin 3

Fish 7

Flower 1

Greens 1

Jelly Fish 2

Oyeter 1

Plant 3

Plant 5

Plant 6

Rock

Sea shell 2

Seahorse 2

Shark 1

Starfish 1

Stingray 2

Turtle 2

 

   Merge visible and add your copyrights and your name.

I used Ocean for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

"Welcome to my Nightmare" CT tag and PTU tutorial for Dance in the Rain

 

"Welcome to my Nightmare" CT tag and PTU tutorial for Dance in the Rain
Artist: Carnival by Jose Cano @ Cano Tubes
Purchase tube here

You must have a license to use his art.
Scrap Kit: "Welcome to my Nightmare by Dance in the Rain @ Pics for Design
Purchase kit here

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Carnival by Jose Cano @ Cano Tubes
Purchase tube here

Scrapkit: "Welcome to my Nightmare by Dance in the Rain @ Pics for Design
Purchase kit here

Font: PW Gothic Style

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/21/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed
Paper 1 and apply your mask of choice.  Merge group.

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired. I made it look like she is sitting on a tree branch.  Dropshadow your elements and main tube.  Here are the elements I used:

Element 15
Element 16
Element 25
Element 28
Element 29
Element 31
Element 32
Element 36
Element 42
Element 43
Element 44
Element 45
Element 54
Element 63
Element 64
Element 66
Element 71
Element 72
Element 78
Element 92
Element 99
Element 114
Element 121
Element 122

 

I also added the two owl tubes frome the Alfadesire tube to the canvas too.  I made them look like they are flying down to land on her.   Merge visible and add your copyrights and your name.

I used PW Gothic Style for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie

 

"When Darkness Falls" CT tag and PTU tutorial for Mystical Scraps

 

 

"When Darkness Falls"  CT tag and PTU tutorial for Mystical Scraps
Artist: Alfadesire @ Pics for Design
Purchase tube here

You must have a license to use this art.
Scrap Kit: "When Darkness Falls by Heather's Devine Dezines @ Mystical Scraps
Purchase kit here

 

 

PSP - I use 9 but any version should work.

Mask: Mask of Choice

Supplies:

Artist:  Alfadesire @ Pics for Design
Purchase tube here

Scrapkit: "When Darkness Falls by Heather's Devine Dezines @ Mystical Scraps
Purchase kit here

Font: Vampiress

FILTERS USED:  Gradient Glow, and Drop Shadow.

This tutorial was written by me on 4/21/2014, using my own ideas. Any resemblance to others is coincidental and accidental. This tutorial assumes you have a working knowledge of psp and is written in PSP9.

Please leave some love when downloading supplies. The artists/creators work hard to make/share their work with us, so let's be appreciative. Please use all correct copyright/license information and follow all TOU’s. Let’s give credit where credit is due.

As always, tutorials are only a guideline. If you don't have the exact supplies, use ones you have or ones you choose.

Ok let's begin. 

Open a new canvas 650x650

 Copy and paste on the bottom layer and resize as needed
pp 6 paper and apply your mask of choice. 

Copy and paste your main tube of choice and resize as needed and place where desired.  Now you can place whatever elements you would like, resize as needed and place where desired. I made it look like she is sitting on a tree branch.  Dropshadow your elements and main tube.  Here are the elements I used:

el 3
el 4
el 5
el 6
el 9
el 12
el 17
el 20
el 21
el 23
el 24
el 32
el 33
el 34
el 37
el 39
el 40
el 41
el 42
el 44
el 45
el 50
el 53
el 54
el 60
el 61
el 63
el 64
el 67
el 69
el 71
el 72
el 74
el 76
el 78
el 84
el 97
el 100

 

I also added the two owl tubes frome the Alfadesire tube to the canvas too.  I made them look like they are flying down to land on her.   Merge visible and add your copyrights and your name.

I used Vampiress for the name.

Merge all visible and save as PNG.

And your done.  Hope you enjoyed using my tutorial.

xoxo

Angie